When reads are performed from the Avalon®-MM slave port on the Altera® PLL Reconfig megafunction, the mgmt_waitrequest is not asserted correctly as specified in the Avalon Interface Specification (PDF) which will lead to the Avalon-MM master reading the incorrect data. A patch is available for Quartus® II 12.0sp2, 2.dp9d, which may be downloaded from the link below. This patch must be installed after installing the dp9 patch available from the related solution "How do I address known software issues for Stratix® V, Arria® V and Cyclone® V devices in the Quartus II software version 12.0sp2?" This problem is scheduled to be fixed in a future version of the Quartus II software as well as future device patches to 12.0sp2. Why do reads from my Altera PLL Reconfig megafunction fail?
Related articles
Related Products
This article applies to 15 products
Cuando se realizan lecturas desde el puerto esclavo Avalon®-MM en la megafunción Altera® PLL Reconfig, la mgmt_waitrequest no se afirma correctamente como se especifica en la especificación de interfaz de Avalon (PDF), lo que hará que el maestro Avalon-MM lea los datos incorrectos.
Se puede descargar un parche para Quartus® II 12.0sp2, 2.dp9d desde el siguiente enlace.
Este parche debe instalarse después de instalar el parche dp9 disponible en la solución relacionada "¿Cómo soluciono problemas de software conocidos para dispositivos Stratix® V, Arria® V y Cyclone® V en la versión 12.0sp2 del software Quartus® II?"
Este problema se corrigió en una versión 12.1sp1 del software Quartus®II y el dispositivo se corrige en 12.0sp2.
- Quartus II 12.0sp2 parche 2.dp9d para Windows
- Quartus II 12.0sp2 parche 2.dp9d para Linux
- Archivo Léame del parche Quartus II 12.0sp2 2.dp9d