Introducción
Provides Intel® Ethernet Controller Driver for Linux* based on the Intel® Server Board M10JNP2SB.
Descargas disponibles
- CentOS 7.4*, Red Hat Enterprise Linux 7.4*, Red Hat Enterprise Linux 7.6*, CentOS 7.6*, SUSE Linux Enterprise Server 15*, Red Hat Enterprise Linux 7.5*
- Tamaño: 337.9 KB
- SHA1: B1DE7A29A4EBD986D60F692423A15EE517FA4D0E
Descripción detallada
Overview
This driver supports kernel versions 2.6.30 or newer. The associated Virtual
Function (VF) driver for this driver is igbvf.
Driver information can be obtained using ethtool, lspci, and ifconfig. Instructions on updating ethtool can be found in the section Additional
Configurations later in this document.
This driver is only supported as a loadable module at this time. Intel is not supplying patches against the kernel source to allow for static linking of the drivers.
Esta descarga es válida para los productos mencionados a continuación.
Descargo de responsabilidad1
Información sobre productos y desempeño
Intel se encuentra en el proceso de eliminar el lenguaje no inclusivo de la documentación actual, las interfaces de usuario y el código. Tenga presente que no siempre es posible realizar cambios retroactivos; asimismo, es posible que instancias de lenguaje no inclusivo permanezcan en documentación anterior, interfaces de usuario y código.
El contenido de esta página es una combinación de la traducción humana y automática del contenido original en inglés. Este contenido se ofrece únicamente para su comodidad como información general y no debe considerarse completa o precisa. Si hay alguna contradicción entre la versión en inglés de esta página y la traducción, prevalecerá la versión en inglés. Consulte la versión en inglés de esta página.